Ganju E., Han F., Prezzi M., R. Salgado and J. S. Pereira, (2019), Quantification of displacement and particle crushing around a penetrometer tip, Geoscience Frontiers, GSF 847

Francioso V., Moro C., I. Martinez-Lage and M. Velay-Lizancos, (2019), Curing temperature: A key factor that changes the effect of TiO2 nanoparticles on mechanical properties, calcium hydroxide formation and pore structure of cement mortars, Cement and Concrete Composites, Vol. 104, 103374

Moini M., Olek J., Youngblood J. P., B. Magee and P. D. Zavattieri, (2018), Additive Manufacturing and Performance of Architectured Cement-Based Materials, Adv. Mater. 2018, 30, 1802123.

Moini M., Olek J., Magee B., P. Zavattieri and J. Youngblood, (2019), Additive Manufacturing and Characterization of Architectured Cement-Based Materials via X-Ray Micro-computed Tomography. In: Wangler T., Flatt R. (eds) First RILEM International Conference on Concrete and Digital Fabrication - Digital Concrete 2018. DC 2018. RILEM Bookseries, vol. 19 Springer, Cham

Moro Carlos, El Fil Hala, Vito Francioso and Mirian Velay-Lizancos, (2021), Influence of water-to-binder ratio on the optimum percentage of nano-TiO2 addition in terms of compressive strength of mortars: A laboratory and virtual experimental study based on ANN model, Construction and Building Materials, Volume 267, 18 January 2021, 120960

Moro Carlos, Vito Francioso, and Mirian Velay-Lizancos, (2021), Modification of CO2 capture and pore structure of hardened cement paste made with nano-TiO2 addition: Influence of water-to-cement ratio and CO2 exposure age, Construction and Building Materials, Volume 275, 15 March 2021, 122131

Fieseler C., Mitchell C. A., LJ Pyrak‐Nolte and J. N. Kutz, (2022), Characterization of acoustic emissions from analogue rocks using sparse regression‐DMDC, Journal of Geophysical Research: Solid Earth 127 (7), e2022JB024144

Jiang L. & L. J. Pyrak-Nolte, (2018), Elastics wave conversion from fractures with oriented voids, American Rock Mechanics Association, ARMA 18–1204

Jiang L., H. Yoon & L. J. Pyrak-Nolte, (2019), Monitoring Fracture Formation in Additively Manufactured Anisotropic Rocks, 9th International Conference of Acoustic Emission & 61th Acoustic Emission Working Group Meeting, Extended Abstract, Chicago IL

Jiang L., H. Yoon & L. J. Pyrak-Nolte, (2019), Effect of Mineral Orientation on Roughness and Toughness of Mode I Fractures, ARMA 19-0483

Jiang L., Yoon H. A Bobet and L. J. Pyrak-Nolte, (2020), Mineral fabric as a hidden variable in fracture formation in layered media, Scientific Reports 10 (1), 2260 22

Jiang L., Yoon H., A Bobet and L. J. Pyrak-Nolte, (2021), Fracture Formation in Layered Synthetic Rocks With Oriented Mineral Fabric Under Mixed Mode I and II Loading Conditions, ARMA US Rock Mechanics/Geomechanics Symposium, ARMA-2021-1767

Jiang Liyang, (2022), Microstructural Controls on Macro-Scale Properties of Rock, Physics and Astronomy, Dissertation, Doctor of Philosophy, Purdue University

Kosson D., Gruber C., Taylor A., Brown K., Delapp R., Brown L., Ayers J., Matteo E. N., Jove-Colon C. F., C. A. Mitchell and Laura Pyrak-Nolte, (2021), Estimating Long-term Performance of Cement-Rock Interfaces, Sandia National Lab.(SNL-NM), Albuquerque, NM (United States), SAND2021-6117C

Mitchell C. A. & L. J. Pyrak-Nolte, (2018), Microstructural Controls on the Macroscopic Behavior of Geo-Architected Rocks, American Rock Mechanics Association, ARMA-18-1235

Mitchell C. A. & L. J. Pyrak-Nolte, (2018), Monitoring geochemically-induced fractures in synthetic rocks, 9th International Conference of Acoustic Emission & 61th Acoustic Emission Working Group Meeting, Extended Abstract, Chicago IL

Mitchell C. A. and L. Pyrak-Nolte, (2023), Protective Porous Media—The Pore and Fiber Structure of Face Masks, Album of Porous Media: Structure and Dynamics, 17-17

Mitchell C. A., (2023), Microstructural Controls on the Macroscopic Behavior of Analogue Rocks (Geo-architected Rocks), Geophysics, Dissertation, Doctor of Philosophy, Purdue University

Trageser J. E., Mitchell C. A., Jones R. E., Matteo E. N., J. M. Rimsza and L. J. Pyrak-Nolte, (2022), The effect of differential mineral shrinkage on crack formation and network geometry, Scientific Reports 12 (1), 22264

Yoon H., Williams M., Jiang L, L Pyrak-Nolte and A Bobet, (2020), Geomechanical Characterization of Gypsum-Based 3D Printed Materials, Sandia National Lab.(SNL-NM), Albuquerque, SAND2020-11010C

Bar-Nes, G., Klein-BenDavid, O., Kosson, D, Gruber, C., Taylor, A., Brown, K., Delapp, R., Brown, L., Ayers, J., Meeussen, H., Matteo, Edward N, Jove-Colon, Carlos F., Chven Andreas Melissa Mitchell and Laura J. Pyrak-Nolte, (2020), NUCLEAR WASTEFORM AND BARRIER MATRIXES INTERACTIONS WITH GEOLOGIC STRATA IN THE SUBSURFACE OF THE YAMIN PLATEAU NORTHERN NEGEV ISRAEL, Sandia National Lab. (SNL-NM), OSTI Identifier: 1830995, SAND2020-12454PE 691894

Fan Yaohui, (2021), TIN-BISMUTH LOW TEMPERATURE SOLDER SYSTEMS -DEVELOPMENT AND FUNDAMENTAL UNDERSTANDING, Dissertation, Doctor of Philosophy, Materials Engineering, Purdue University

Fan Yaohui, Wu Yifan, Dale F. Travis, Lakshminarayana Sukshitha, Greene Colin, Badwe U. Nilesh, Aspandiar F. Raiyo, Blendell E. John, Ganesh Subbarayan and Carol A. Handwerker, (2021), Influence of Pad Surface Finish on the Microstructure Evolution and Intermetallic Compound Growth in Homogeneous Sn-Bi and Sn-Bi-Ag Solder Interconnects, Journal of Electronic Materials volume 50, pp 6615–6628

Kim G., B. R. Denos and R. Sterkenburg, (2019), Influence of different piercing methods of abrasive waterjet on delamination of fiber reinforced composite laminate, Composite Structures, Volume 240, 15 May 2020, 112065

Kravchenko Sergii G., Sommer a Drew E., Denos Benjamin R., William B. Avery and R. Byron Pipes, (2019), Structure-property relationship for a prepreg platelet molded composite with engineered meso-morphology, Composite Structures, Volume 210, 15 February 2019, pp 430-445

Ma Siming, Shang Zhongxia, Shang Anyu, Zhang Peter, Tang Chenglu, Huang Yuze, Leung Chu Lun A., Lee Peter D., Xinghang Zhang and Wang Xiaoming, (2023), Additive manufacturing enabled synergetic strengthening of bimodal reinforcing particles for aluminum matrix composites, Additive Manufacturing, Volume 70, 25 May 2023, 103543

Mohanty Debapriya P., Arnold Brian J., Baruah Sweta, Srinivasan Chandrasekar and James B. Mann, (2023), A new class of high performance metal-fiber thermoplastic composites for additive manufacturing, Composites Part A:, Applied Science and Manufacturing, Volume 169, June 2023, 107519

Lyons Sarah, (2022), Characterization of the Effects of Internal Channel Roughness on Fluid Flow and Heat Transfer in Additively Manufactured Microchannel Heat Sinks, Thesis, Master of Science in Mechanical Engineering, Purdue University

Indeck J., Cuadra J., C. Williamms and K. Hazeli, (2019), Accumulation and evolution of elastically induced defects under cyclic loading: quantification and subsequent properties, International Journal of Fatigue

Zhang Bin, Shunyu Liu, and Yung C. Shin, (2019), In-Process monitoring of porosity during laser additive manufacturing process, Additive Manufacturing Vol. 28, pp. 497-505, ISSN 2214-8604