Cryogenic Pipe Installed

The XENON1T detector sits in the center of a large water tank. All the signal and high voltage cables, pipes for liquid and gaseous xenon, vacuum piping and various other lines get there via one large pipe.

Installation of the cryogenic pipe inside the XENON1T water tank, July 2014

Installation of the cryogenic pipe inside the XENON1T water tank, July 2014

We have just finished the installation of this pipe. It’s actually a quite fascinating piece of engineering. In it, there are all the signal and high voltage cables for the photomultiplier tubes. There are pipes to recirculate the xenon for purification in the adjacent building, which are themselves inside a vacuum-insulated pipe that in turn runs inside this pipe. The large diameter pipe is also used to evacuate the cryostat, as well as the heat insulation of the cryostat. And it holds a bunch of extra cables and wires for various other sensors. So, it’s really much more than just a pipe. It’s the lifeline to the detector. And it’s pretty cramped:

Cable bunches

These are the signal wires, bunched together into a single pipe inside the cryogenic pipe. They are PTFE-insulated, low-radioactivity wires with custom-made connectors.