Differences

This shows you the differences between two versions of the page.

--- wiki:software:email:pine:print [2008/12/04 08:51]
Tomas Ratkus Created- Tom
+++ wiki:software:email:pine:print [2009/04/08 15:52] (current)
Tomas Ratkus headers
@@ Line 1: / Line 1: @@
+====== PINE Printers ======
+===== Before You Start... =====
+Find out the name of the printer you want to setup. In this How-To we will us the printer "babbage".
+===== PINE's printer configuration screen =====
+On PINE's Main Menu:
+. Type S for Setup
+. Type P for Printer
+This will give you a screen that looks similiar to Figure 1.
+{{:wiki:software:email:pine:printerimage1.jpg|}}
+===== Figure 1 - PINE Configuration Menu =====
+To edit a field simply navigate down to the field you want to edit by using the keyboard.  To setup a network printer in PINE, press the down arrow key 3 times.  This will take you down to the Personally selected print command field as seen in Figure 2.
+{{:wiki:software:email:pine:printerimage2.jpg|}}
+===== Figure 2 - Personally selected print command =====
+To add a printer, press the **A** key and type in the name you want to refer to the printer as.  It is easier to use the same name as the printer you are setting up such as babbage.  When you are done press the **enter** key.
+PINE will then prompt you to enter the command to use to print to this printer. The general command is as follows:
+<codebash>lpr -Pprinter_name</code>
+Substitute <color red>printer_name</color> with the name of the printer, in our case **babbage.**
+For our babbage example the command is shown in Figure 3.
+{{:wiki:software:email:pine:printerimage3.jpg|}}
+===== Figure 3 - Entering the command to print to babbage =====
+**Saving the Changes you made...**
+To exit and save changes:
+. Press E to Exit Setup
+. Press Y to Accept and Save Changes
+You can now print to the printer you setup, in our example we now can print to the printer **babbage.**